skip to Main Content
+90 (506) 158 23 62

Cestel PUR1000

Cestel PUR1000


Non-solvent, high elastic and mechanical properties, hygenic self-leveling polyurethane coating material.


It is resistant to abrasion and friction. It has an elastic structure and creates seamless surfaces.  It does not contain solvent, clean and apply easily.

Application Fields

Factories, cold rooms, shopping malls, plane hangar, warehouses, schools, hospitals, car parkings…


In general, polyurethane coating performance and adhesion are directly proportional to surface preparation. Most failures in the performance of surface coatings can be attributed to poor surface preparation. Polyurethane coatings rely on the structural strength of the substrate to which they are applied. All surfaces must be free of dust, dirt, oil, grease, rust, corrosion and other contaminants. When coating substrates previously used, it is important to consider the possibility of substrate absorption, which may affect the adhesion of the coating system, regardless of the surface preparation. Cestel recognizes the potential for unique substrates from one project to another.

If old concrete has a surface that has deteriorated to an unacceptably rough surface, Cestel repair agent sand should be used for cracks, spalls, bug holes and voids.  Upon full cure of the repair agent, prime the entire surface intended for coating.


In originally sealed packages, the material can be stored for 12 months.